Ok, a small FAQ and HowTo ;)

What is this machine ?
It is a black-box containing the following stages:
Input -> Multi-Band Compressor -> Some Room effect -> Loudness Maximizer -> Limiter -> Output

QUICKGUIDE:

- Use it in front of the master ( yes summ-compression ) right after the mixer if u use it.
- Set the output to WET
- Set Attack to something around 500ms
- Set Ratio to 12:1
- Set Bass to 7 or 8
- Set RoomSim to something High
- *Adjust* Loudness to a high value where u dont feel the sound being distorted

FAQ:

Q: Why does it fuck up my cpu ?
A: Ur cpu is too slow !

Q: Why isnt this a standalone proggy ?
A: 1. best quality  2. I like Buzz  3. I hate Gui coding  4. Im very very lazy

Q: Is Loudness just a Gain ?
A: Not at all ! If u dont trust it test it with a pure sinus and watch the frequency spectrum

Q: how many bands does the multi-band comp use ?
A: effectively around 256

Q: is there latency ?
A: yes around 46ms - thats why u should use it before the master

Q: What does RoomSim do - sometimes it works different ?
A: RoomSim is dynamic effect it may not do anything when it *finds* what it wants to do...

Q: Are the parameters Real ?
A: No. For example Ratio influences how much of the freq spectrum is touched and
   Attack how fast the filters adapt to changes - they dont correspond to real values
   found on normal compressors but were chosen for easy understanding.

Q: there is noise at certain values !
A: hehe yes this is right
   - if u flatten a spectrum too much it becomes white noise
   - when samples contain some little noise it will be raised when the overall spectrum is low

OK after all i say: MIX TO 0 dB !

emil: DocBexter@gmx.net ( only temporary )
goto: www.BuzzMachines.com and #Buzz #Phatbuzz @ EfNet ;)